Synthesis and Characterization of Novel Liquid Crystalline Epoxy Resin with Low Melting Point

A liquid crystalline epoxy resin (LCE) having α-methylstilbene as a mesogenic unit and an ethylene-oxy unit as a spacer (DGE(C2-MS-C2)) was synthesized and characterized. DGE (C2-MS-C2) has a lower melting point (MP) compared to the diglycidylether of 4,4′-dihydroxy-α-methylstilbene (DGEDHMS). The curing of DGE (C2-MS-C2) with diaminodiphenylethane (DDEt) in a mesophase generated a liquid crystalline (LC) network, which have a more highly layered structure than DGEDHMS. The LC network showed extensively large fracture energy on a tensile test. Introducing spacers outside the mesogen unit promotes the mesogen unit to form a highly ordered structure, which enhances the versatility of LC epoxy resins.     

Logging damage and injured tree mortality in tropical forest management

Using insights from the forest ecology literature, we analyze the effect of injured trees on stand composition and carbon stored in above‐ground biomass and the implications for forest management decisions. Results from a Faustmann model with data for a tropical forest on Kalimantan show that up to 50% of the basal area of the stand before harvest can consist of injured trees. Considering injured trees leads to an increase in the amount of carbon in above‐ground biomass of up to 165%. These effects are larger under reduced impact logging than under conventional logging. The effects on land expectation value and cutting cycle are relatively small. The results suggest that considering injured trees in models for tropical forest management is important for the correct assessment of the potential of financial programs to store carbon and conserve forest ecosystem services in managed tropical forests, such as reducing emissions from deforestation and forest degradation and payment for ecosystem services. Recommendations for Resource Managers

• Considering the role of injured trees is important for managing tropical forests
• These trees can cover up to 50% of basal area and contain more than 50% of the carbon stored in above‐ground biomass
• Reduced impact logging leads to a larger basal area of injured trees and more carbon stored in injured trees than conventional logging
• Injured trees play an important role when assessing the potential for carbon storage in the context of payment for forest ecosystem services.

     

A novel self-locked energy absorbing system

Metallic thin-walled round tubes are widely used as energy absorption elements. However, lateral splash of the round tubes under impact loadings reduces the energy absorption efficiency and may cause secondary damage. Therefore, it is necessary to assemble and fasten round tubes together by boundary constraints and/or fasteners between tubes, which increases the time and labor cost and affects the mechanical performance of round tubes. In an effort to break through this limitation, a novel self-locked energy-absorbing system has been proposed in this paper. The proposed system is made up of thin-walled tubes with dumbbell-shaped cross section, which are specially designed to interlock with each other and thus provide lateral constraint under impact loadings. Both finite element simulations and impact experiment demonstrated that without boundary constraints or fasteners between tubes, the proposed self-locked energy-absorbing system can still effectively attenuate impact loads while the round tube systems fail to carry load due to the lateral splashing of tubes. Furthermore, the geometric design for a single dumbbell-shaped tube and the stacking arrangement for the system are discussed, and a general guideline on the structural design of the proposed self-locked energy absorbing system is provided.     

固体的冲击拉伸碎裂

固体材料在冲击拉伸载荷作用下常常会断裂成多个碎片(碎片化)，固体材料碎片化的物理机制是多点损伤同时在固体中成核和发展，导致固体多处破坏。自 Mott 对固体的动态碎裂问题进行了开创性研究后，几十年来，对固体动态碎裂机制的研究一直是应用物理学、力学、航天和兵器工程等领域共同关心的重要课题。本文介绍了在冲击拉伸载荷作用下固体的动态碎裂研究的发展历史，给出相关的理论分析、实验研究和数值模拟的研究进展，特别针对现有的各种关于碎片尺度、碎片分布、以及碎片化物理机制的理论模型进行了较详尽的阐述和讨论，最后指出现有实验和理论研究中仍然存在的关键科学问题及进一步的研究展望。     

SPH方法研究空气在平板入水中的影响

飞机水上迫降以及船体在高速行驶时,均会发生结构物砰击水面的现象,当结构物底面较为平坦,砰击水面时会捕获空气,在板底形成空气垫。研究空气垫的形成及影响,有助于对结构物进行更准确的载荷分析。该问题的研究涉及到气固液三相的相互作用,在数值模拟中仍是一个挑战,本文使用光滑粒子流体动力学(SPH)方法对该问题进行模拟。首先,与实验结果进行对比;其次,系统地研究了平板形成空气垫以及砰击水面的过程,考查了空气、水和平板的动能变化。对比了在SPH模拟中考虑空气与不考虑空气得到的水压力场和平板所受压力,说明了空气对结果的影响;最后,研究了平板宽度对空气垫形成的影响,从而进一步影响加速度。     

The effect of methyl group on the mechanical properties of hydrophobic association hydrogel

Hydrophobic association hydrogels were fabricated via micellar copolymerization of acrylamide and hydrophobic monomers lauryl (meth)acrylate (LA or LMA) in an aqueous solution of sodium dodecyl sulfate. The effect of methyl groups of hydrophobic monomers on the crosslinking network structure and mechanical behavior of the gels was investigated on the basis of rubber elastic theory. It was found that the LMA-gel exhibited higher effective crosslink density and elastic modulus. The methyl groups of hydrophobic monomers limited the flexibility of the methacrylate backbone in the association domain, which resulted in the increment of chains constraints. With the increase of stretch rate, the dissipated energy of LMA-gel increased more highly than that of LA-gel. In addition, the methyl group hindered the movement of polymer chains, leading to the lower recovery efficiency of dissipated energy for LMA-gel. In contract, the LA-gel exhibited a rapid response to external force, and possessed better elasticity and self-recovery property. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1505–1512     

Enhanced chemical reworkability of DGEBA thermosets cured with rare earth triflates using aromatic hyperbranched polyesters (HBP) and multiarm star HBP‐b‐poly(ε‐caprolactone) as modifiers

A hyperbranched aromatic polyester (HBPOH) has been synthesized, and poly(ε‐caprolactone) arms have been grown on some of its end hydroxyl groups (HBPCL). These modifiers have been used in cationic diglycidyl ether of bisphenol A formulations cured with ytterbium triflate as cationic initiator. The effect of HBPOH and HBPCL on the curing kinetics has been studied using differential scanning calorimetry (DSC). The obtained materials have been characterized by dynamomechanical analysis, DSC, thermogravimetric analysis and mechanical tests. The modifiers are incorporated into the thermosetting network because of the participation of the end hydroxyl groups in the cationic curing of epoxides by the activated monomer mechanism. Homogeneous thermosets have been obtained with a remarkable increase in impact strength without sacrificing elastic modulus or hardness. A compromise between the rigid structure of the aromatic hyperbranched core and the flexibilizing effect of the poly(ε‐caprolactone) arms is believed to be responsible for the overall thermal and mechanical properties of the materials. The use of these polymeric modifiers increases the thermal stability of the resulting materials because of the low degradability of the aromatic ester groups in the hyperbranched core and the incorporation of the modifier into the network structure. However, the presence of such ester groups makes them reworkable by hydrolysis or alcoholysis in an alkaline medium, thus opening a way for recovery of valuable substrates. Copyright © 2013 John Wiley & Sons, Ltd.     

Alternating and Random Copolymers of Vinyl Acetate and Maleic Anhydride

Alternating copolymers of vinyl acetate (VAc) and maleic anhydride (MA) are produced preferentially when VAc and MA are copolymerized at moderate temperatures while random copolymers are produced at temperatures above 90°C. A charge-transfer complex (CTC) of VAc/MA exists at moderate temperatures but does not exist at temperatures above 90°C.     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.     

Effect of scale and surface chemistry on the mechanical properties of carbon nanotubes‐based composites

In this article, Multi‐Walled Carbon Nanotubes (MWCNTs) of varying diameters, both untreated and polycarboxylated, were dispersed at constant weight percentage in an epoxy matrix, and resulting fracture toughnesses (K_Ic) were measured in each case. We show that changing the MWCNT diameter has two effects on the composite fracture toughness: (i) a small MWCNT diameter enables larger interfacial surface for adhesion maximization, which increases toughness; (ii) at the same time, it limits the available pull‐out energy and reduces the MWCNT ability to homogeneously disperse in the matrix due to this same large active surface: this decreases toughness. Most commercially available MWCNTs have a length range of several μm, thus an optimal diameter exists which depends on MWCNT wall thickness and surface treatment. Such optimal diameter maximizes pull‐out energy and thus composite fracture toughness. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012